View Issue Details

IDProjectCategoryView StatusLast Update
0001742PartDesignFeaturepublic2017-01-16 18:41
Reporterquick61 Assigned To 
PrioritynormalSeverityminorReproducibilityhave not tried
Status newResolutionopen 
Product Version 
Target VersionFixed in Version 
Summary0001742: Add Reverse Fillet Tool or Option in Part / Part Design
DescriptionThe discussion has come up several times on the forum about the lack of a reverse fillet tool. The most recent one starting here - http://forum.freecadweb.org/viewtopic.php?f=3&t=7633&p=62333#p62329

Attached is an image of what the end result of the reverse fillet would be. If OCE will allow the implantation of such a tool, it would be a nice feature to have in the next release.
TagsGUI, Part, Part Design
FreeCAD Information

Activities

quick61

2014-09-11 22:44

reporter  

Reverse_Fillet.png (12,608 bytes)
Reverse_Fillet.png (12,608 bytes)

quick61

2014-09-13 03:39

reporter   ~0005095

An older Forum discussion on this subject is here - http://forum.freecadweb.org/viewtopic.php?f=3&t=6667&hilit=ogee#p53838

And from this post - http://forum.freecadweb.org/viewtopic.php?f=3&t=6667&hilit=ogee&start=10#p53899 - it would seem that a proper name for the tool would be Cove.

Issue History

Date Modified Username Field Change
2014-09-11 22:44 quick61 New Issue
2014-09-11 22:44 quick61 File Added: Reverse_Fillet.png
2014-09-13 03:39 quick61 Note Added: 0005095
2014-09-13 03:40 quick61 Tag Attached: GUI
2014-09-13 03:40 quick61 Tag Attached: Part
2014-09-13 03:40 quick61 Tag Attached: Part Design
2017-01-16 18:41 Kunda1 Project FreeCAD => PartDesign