View Issue Details

IDProjectCategoryView StatusLast Update
0001560SketcherFeaturepublic2018-10-06 14:54
ReporterCABrouwers Assigned Toabdullah  
PrioritynormalSeverityminorReproducibilityN/A
Status assignedResolutionopen 
Product Version0.13 
Target Version0.19Fixed in Version 
Summary0001560: Provide ability to fine-tune auto constraints.
DescriptionIt could be nice to be able to select which constraints are automatically added when using auto constraints. For example, I usually would set the coincidence constraint on but I would rather turn the tangent constraint off because I find it is often creates unwanted constraints.
Tagsconstraints, Solver
FreeCAD Information

Activities

Kunda1

2017-05-22 13:32

administrator   ~0009079

@Abdullah do you mind weighing in on this ticket?

abdullah

2017-05-22 21:47

manager   ~0009093

It is a rightful request. I also find tangency is sometimes getting in the way. It is just a new feature request... I assign it to myself ;)

Issue History

Date Modified Username Field Change
2014-05-20 20:41 CABrouwers New Issue
2017-05-22 13:31 Kunda1 Tag Attached: Solver
2017-05-22 13:32 Kunda1 Note Added: 0009079
2017-05-22 21:47 abdullah Note Added: 0009093
2017-05-22 21:47 abdullah Assigned To => abdullah
2017-05-22 21:47 abdullah Status new => assigned
2017-09-26 15:22 Kunda1 Tag Attached: constraints
2017-10-18 12:23 wmayer Project FreeCAD => Sketcher
2017-12-13 15:20 Kunda1 Project Sketcher => GCS
2018-06-09 09:10 abdullah Project GCS => Sketcher
2018-10-06 14:54 abdullah Target Version => 0.19