View Revisions: Issue #4126

Summary 0004126: 0 length lines in sketch introduce bugs at Part-> Revolve time
Revision 2019-09-14 18:14 by baltic
Steps To Reproduce Create a simple sketch in XY plane like that:

img here...

On the top part of it add 2 fillets:

img here...

Constrain their radiuses to 1mm

img here...

Constrain the thickness of the wall to 2mm

img here...

Now you effectively have 0 length line between the 2 arcs.
When you rotate it through Part->Revolve tool around Y axis, you get a non hollow object:

img here...

But it supposed to be hollow. When you delete the 0 length line from sketch, the tool works correct.
Revision 2019-09-14 18:12 by baltic
Steps To Reproduce Create a simple sketch in XY plane like that:

link here...

On the top part of it add 2 fillets:



Constrain their radiuses to 1mm



Constrain the thickness of the wall to 2mm



Now you effectively have 0 length line between the 2 arcs.
When you rotate it through Part->Revolve tool around Y axis, you get a non hollow object:



But it supposed to be hollow. When you delete the 0 length line from sketch, the tool works correct.
Revision 2019-09-14 18:10 by baltic
Steps To Reproduce Create a simple sketch in XY plane like that:



On the top part of it add 2 fillets:



Constrain their radiuses to 1mm



Constrain the thickness of the wall to 2mm



Now you effectively have 0 length line between the 2 arcs.
When you rotate it through Part->Revolve tool around Y axis, you get a non hollow object:



But it supposed to be hollow. When you delete the 0 length line from sketch, the tool works correct.
Revision 2019-09-14 17:23 by Kunda1
Steps To Reproduce Create a simple sketch in XY plane like that:



On the top part of it add 2 fillets:



Constrain their radiuses to 1mm



Constrain the thickness of the wall to 2mm



Now you effectively have 0 length line between the 2 arcs.
When you rotate it through Part->Revolve tool around Y axis, you get a non hollow object:



But it supposed to be hollow. When you delete the 0 length line from sketch, the tool works correct.
Revision 2019-09-14 17:20 by Kunda1
Steps To Reproduce Create a simple sketch in XY plane like that:



On the top part of it add 2 fillets:



Constrain their radiuses to 1mm

Constrain the thickness of the wall to 2mm

Now you effectively have 0 length line between the 2 arcs.
When you rotate it through Part->Revolve tool around Y axis, you get a non hollow object:

But it supposed to be hollow. When you delete the 0 length line from sketch, the tool works correct.
Revision 2019-09-14 17:18 by Kunda1
Steps To Reproduce Create a simple sketch in XY plane like that:

On the top part of it add 2 fillets:

Constrain their radiuses to 1mm

Constrain the thickness of the wall to 2mm

Now you effectively have 0 length line between the 2 arcs.
When you rotate it through Part->Revolve tool around Y axis, you get a non hollow object:

But it supposed to be hollow. When you delete the 0 length line from sketch, the tool works correct.
Revision 2019-09-14 17:18 by Kunda1
Steps To Reproduce Create a simple sketch in XY plane like that:
[img]https://i.ibb.co/FHM8kYb/bug2.png">
Constrain their radiuses to 1mm

Constrain the thickness of the wall to 2mm

Now you effectively have 0 length line between the 2 arcs.
When you rotate it through Part->Revolve tool around Y axis, you get a non hollow object:

But it supposed to be hollow. When you delete the 0 length line from sketch, the tool works correct.
Revision 2019-09-13 10:45 by baltic
Steps To Reproduce Create a simple sketch in XY plane like that:

On the top part of it add 2 fillets:

Constrain their radiuses to 1mm

Constrain the thickness of the wall to 2mm

Now you effectively have 0 length line between the 2 arcs.
When you rotate it through Part->Revolve tool around Y axis, you get a non hollow object:

But it supposed to be hollow. When you delete the 0 length line from sketch, the tool works correct.
Revision 2019-09-13 10:40 by baltic
Steps To Reproduce Create a simple sketch in XY plane like that:

On the top part of it add 2 fillets:

Constrain their radiuses to 1mm

Constrain the thickness of the wall to 2mm

Now you effectively have 0 length line between the 2 arcs.
When you rotate it through Part->Revolve tool you get non hollow object:

But it supposed to be hollow. When you delete the 0 length line from sketch, the tool works correct.
Revision 2019-09-13 10:36 by baltic
Steps To Reproduce Create a simple sketch in XY plane like that:

On the top part of it add 2 fillets:

Constrain their radiuses to 1mm

Constrain the thickness of the wall to 2mm

Now you effectively have 0 length line between the 2 arcs.
When you rotate it through Part->Revolve tool you get non hollow object:

But it supposed to be hollow. When you delete the 0 length line from sketch, the tool works correct.
Revision 2019-09-13 10:35 by baltic
Steps To Reproduce Create a simple sketch in XY plane like that:
">
On the top part of it add 2 fillets:

Constrain their radiuses to 1mm

Constrain the thickness of the wall to 2mm

Now you effectively have 0 length line between the 2 arcs.
When you rotate it through Part->Revolve tool you get non hollow object:

But it supposed to be hollow. When you delete the 0 length line from sketch, the tool works correct.