View Revisions: Issue #3932

Summary 0003932: FEM - Selecting the interior solids of CompSolid
Revision 2019-04-15 11:20 by Kunda1
Description I'm going to simulate composite materials but I've come across with inability to select the interior solids of CompSolid.

This problem arises when asigning mesh region and/or material to the interior solid.

Adding a clipping plane to see the interior shapes and selecting either the edge or the face that belong to the interior solid yields a message "Edge (Face) belongs to more than one solid".

I was following this tutorial.

OS: Windows 10
Word size of OS: 64-bit
Word size of FreeCAD: 64-bit
Version: 0.19.16274 (Git)
Build type: Release
Branch: master
Hash: 7c760259a389b38b76da78e4f6e1f9be66714842
Python version: 2.7.14
Qt version: 4.8.7
Coin version: 4.0.0a
OCC version: 7.2.0
Locale: Russian/RussianFederation (ru_RU)
Revision 2019-04-15 11:19 by Kunda1
Description I'm going to simulate composite materials but I've come across with inability to select the interior solids of CompSolid.

This problem arises when asigning mesh region and/or material to the interior solid.

Adding a clipping plane to see the interior shapes and selecting either the edge or the face that belong to the interior solid yields a message "Edge (Face) belongs to more than one solid".

I was following this tutorial.

OS: Windows 10
Word size of OS: 64-bit
Word size of FreeCAD: 64-bit
Version: 0.19.16274 (Git)
Build type: Release
Branch: master
Hash: 7c760259a389b38b76da78e4f6e1f9be66714842
Python version: 2.7.14
Qt version: 4.8.7
Coin version: 4.0.0a
OCC version: 7.2.0
Locale: Russian/RussianFederation (ru_RU)
Revision 2019-04-12 06:14 by AndreiTsayukov
Description I'm going to simulate composite materials but I've come across with inability to select the interior solids of CompSolid.

This problem arises when asigning mesh region and/or material to the interior solid.

Adding a clipping plane to see the interior shapes and selecting either the edge or the face that belong to the interior solid yields a message "Edge (Face) belongs to more than one solid".

I was following this tutorial.

OS: Windows 10
Word size of OS: 64-bit
Word size of FreeCAD: 64-bit
Version: 0.19.16274 (Git)
Build type: Release
Branch: master
Hash: 7c760259a389b38b76da78e4f6e1f9be66714842
Python version: 2.7.14
Qt version: 4.8.7
Coin version: 4.0.0a
OCC version: 7.2.0
Locale: Russian/RussianFederation (ru_RU)