View Revisions: Issue #3932

Summary 0003932: FEM - Selecting the interior solids of CompSolid
Revision 2019-04-15 11:19 by Kunda1
Steps To Reproduce FEM Workbench. Analysis is activated.

0. Create a clipping plane via Utilities -> Clipping plane on face to see the interior
1. Highlight the CompSolid in the tree view
2. Select Mesh -> FEM mesh form shape by Gmsh and then leave the dialog by clicking OK button
3. Highlight FEMMeshGmsh in the tree view and create a Mesh Region via Mesh -> FEM mesh region
4. Enter max element size
5. Toggle the selection mode to Solid and press "Add" button
6.1. In 3D view select edge/face that belongs to the interior solid
6.2. Use SelectingTools and select any solid in the list
Revision 2019-04-12 06:14 by AndreiTsayukov
Steps To Reproduce FEM Workbench. Analysis is activated.

0. Create a clipping plane via Utilities -> Clipping plane on face to see the interior
1. Highlight the CompSolid in the tree view
2. Select Mesh -> FEM mesh form shape by Gmsh and then leave the dialog by clicking OK button
3. Highlight FEMMeshGmsh in the tree view and create a Mesh Region via Mesh -> FEM mesh region
4. Enter max element size
5. Toggle the selection mode to Solid and press "Add" button
6.1. In 3D view select edge/face that belongs to the interior solid
6.2. Use SelectingTools and select any solid in the list