View Revisions: Issue #3831

Summary 0003831: Coincidence marks the center as being coincident with an external geometry point
Revision 2019-02-12 17:30 by chrisb
Description To reproduce:
- create additive cube in PartDesign, e.g. in XY plane, leave all parameters as is;
- attach a sketch to a face by selecting a face and create sketch
- select the pont opposite to the origin for external reference
- create a line with one point coincident with the external point
- select the coincidence in the list of constraints.

Result: the selected point and the origin are shown in green, as if they were connected.

OS: Ubuntu 18.04.1 LTS
Word size of OS: 64-bit
Word size of FreeCAD: 64-bit
Version: 0.18.15780 (Git)
Build type: Release
Branch: master
Hash: f94e76c1116ec3b818961ff65131b3d86fa5b95e
Python version: 2.7.15rc1
Qt version: 5.9.5
Coin version: 4.0.0a
OCC version: 7.3.0
Locale: French/France (fr_FR)

An example is given in the corresponding forum discussion.
Revision 2019-02-12 06:46 by chrisb
Description To reproduce:
- create additive cube in PartDesign, e.g. in XY plane, leave all parameters as is;
- attach a sketch to a face by selecting a face and create sketch
- select the pont opposite to the origin for external reference
- create a line with one point coincident with the external point.
- select the connection point

Result: the selected point and the origin are shown in green, as if they were connected.

OS: Ubuntu 18.04.1 LTS
Word size of OS: 64-bit
Word size of FreeCAD: 64-bit
Version: 0.18.15780 (Git)
Build type: Release
Branch: master
Hash: f94e76c1116ec3b818961ff65131b3d86fa5b95e
Python version: 2.7.15rc1
Qt version: 5.9.5
Coin version: 4.0.0a
OCC version: 7.3.0
Locale: French/France (fr_FR)

An example is given in the corresponding forum discussion.
Revision 2019-02-12 06:44 by chrisb
Description To reproduce:
- create additive cube in PartDesign, e.g. in XY plane, leave all parameters as is;
- attach a sketch to a face by selecting a face and create sketch
- select the pont opposite to the origin for external reference
- create a line with one point coincident with the external point.
- select the connection point

Result: the selected point and the origin are shown in green, as if they were connected.

An example is given in the corresponding forum discussion.