View Revisions: Issue #3832

Summary 0003832: Editing thickness in Part or PartDesign resets join type to always being Arc
Revision 2019-02-12 07:07 by chrisb
Description On editing an existing thickness feature (in PartDesign) or Object (in Part) the Join type is always reset to Arc, independent from the value set before.

To reproduce:
- create default cube
- select one face
- apply thickness
- leave all parameters except JoinType which is set to "Intersection"
- Ok, Thickness is applied, corners are not round.
- Edit thickness with double click in the tree view

Now JoinType is reset to Arc, which causes problems if applied unattended.

There is a discussion in the german forum.

OS: Windows 7
Word size of OS: 64-bit
Word size of FreeCAD: 64-bit
Version: 0.18.15780 (Git)
Build type: Release
Branch: master
Hash: f94e76c1116ec3b818961ff65131b3d86fa5b95e
Python version: 2.7.14
Qt version: 4.8.7
Coin version: 4.0.0a
OCC version: 7.2.0
Locale: German/Germany (de_DE)
Revision 2019-02-12 07:05 by chrisb
Description On editing an existing thickness feature (in PartDesign) or Object (in Part) the Join type is always reset to Arc, independent from the value set before.

To reproduce:
- create default cube
- select one face
- apply thickness
- leave all parameters except JoinType which is set to "Intersection"
- Ok, Thickness is applied, corners are not round.
- Edit thickness

Now JoinType is reset to Arc, which causes problems if applied unattended.

There is a discussion in the german forum.