Translations:Part Cone/10/en

From FreeCAD Documentation
Revision as of 08:37, 25 July 2014 by Renatorivo (talk | contribs)

Options

Cone

  • Radius 1 - radius of the arc or circle defining the lower face
  • Radius 2 - radius of the arc or circle defining the upper face
  • Height - the height of the Part Cone
  • Angle - the number of degrees of the arc or circles defining the upper and lower faces of the truncated cone. The default 360 creates circular faces, a lower value will create a portion of a cone as defined by upper and lower faces each with edges defined by an arc of the number of degrees and two radii.