Sketcher ConstructionMode

From FreeCAD Documentation
Revision as of 11:03, 19 February 2019 by FuzzyBot (talk | contribs) (Updating to match new version of source page)

Toggle construction geometry

Menyplacering
Sketch → Skissgeometrier → Toggle construction geometry
Arbetsbänkar
Sketcher
Standard genväg
Ingen
Introducerad i version
-
Se även
Ingen

Description

This tool toggles sketch geometry from/to construction mode. It can be used on any type of geometry: line, arc or circle.

Construction geometry is an important tool of the sketcher. When using a sketch for a 3D operation, construction geometry is ignored.

In sketch edit mode, construction geometry is shown as blue, and won't turn green when a sketch is fully constrained. Once you exit the sketch mode, construction geometry is hidden in the 3D view.

Construction lines can be used as rotation axis by the PartDesign Revolution feature.

How to use

  • Select one or more sketch geometry in the 3D view, then click on the tool or access it in the menu.

Example

Use Construction mode on some sketch elements,

and once you leave the sketcher editing mode, geometry that was turned into construction have become invisible in the 3D view (but are still present in the Sketcher editing mode).

File:Sketcher ConstructionMode fr 02.png