Sketcher: Vincolo Perpendicolare

From FreeCAD Documentation
Revision as of 22:13, 21 December 2013 by Renatorivo (talk | contribs) (Created page with "{{GuiCommand/it|Name=Constraint Perpendicular|Name/it=Perpendicolare|Workbenches=Schizzo, PartDesign|MenuLocation=PartDes...")

Perpendicolare

Posizione nel menu
PartDesign → Schizzo → Perpendicolare
Ambiente
Schizzo, PartDesign
Avvio veloce
N
Introdotto nella versione
-
Vedere anche
Angolo

Description

The Constrain perpendicular constraint forces two selected lines or line segments in the sketch to be perpendicular to each other

Operation

The sketch below has two lines at a random angle.



Select the two line segments you require to be perpendicular



then click the Constrain Perpendicular icon in the Sketcher toolbar or select the Constrain Perpendicular menu item from the Sketcher constraints sub menu of the Sketcher or Part Design menus (depending upon whether the Sketcher or Part Design workbench is selected) to apply the constraint to the selected lines.



The lines are constrained to be perpendicular.