Sketcher "Ограничение расстояния по горизонтали"

From FreeCAD Documentation
Revision as of 13:32, 19 February 2019 by FuzzyBot (talk | contribs) (Updating to match new version of source page)

Constraint HorizontalDistance

Системное название
Constraint HorizontalDistance
Расположение в меню
Sketch → Ограничения эскиза → Ограничения расстояния по горизонтали
Верстаки
Sketcher, PartDesign
Быстрые клавиши
Нет
Представлено в версии
-
См. также
Ограничения расстояния, Ограничения расстояния по вертикали

Description

Fixes the horizontal distance between 2 points or line ends. If only one point is selected, the distance is set to the sketch origin.

How to use

  1. Pick one or two points or one line.
  2. Press the Constrain horizontal distance button.
  3. A pop up dialog opens to edit or confirm the value. Press OK to validate.

Note: the constraint tool can also be started with no prior selection, but will require selection of two points or one line. To set the distance to the origin, the sketch origin point needs to be selected as well. By default the command will be in continue mode to create new constraints; press the right mouse button or ESC once to quit the command.