Obiecte create prin script-programare

From FreeCAD Documentation
Revision as of 21:22, 10 July 2019 by FuzzyBot (talk | contribs) (Updating to match new version of source page)
PySide
Embedding FreeCAD

Pe lângă tipurile obișnuite de obiecte, cum ar fi adnotările, plasele și obiectele de piese, FreeCAD oferă, de asemenea, uimitoare posibilitate de a scrie scriptul obeictelor 100% Python, numite caracteristici Python. Aceste obiecte se vor comporta exact ca orice alt obiect FreeCAD și vor fi salvate și restaurate automat la salvarea / încărcarea fișierelor.

O particularitate care trebuie înțeleasă, aceste obiecte sunt salvate în fișiere FreeCAD FcStd cu modului python json module. Acest modul transformă un obiect python în șir de caractere(test), permițându-l să fie adăugat la fișierul salvat. Odată încărcat, modulul json utilizează șirul de caracter pentru a recrea obiectul original, cu condiția ca acesta să aibă acces la codul sursă care a creat obiectul. Aceasta înseamnă că dacă salvați un astfel de obiect personalizat și îl deschideți pe o mașină unde codul python care a generat obiectul nu este prezent, obiectul nu va fi recreat. Dacă distribuiți astfel de obiecte ale altora, va trebui să distribuiți în totalitate scriptul python care a creat-o împreună.

Caracteristicile Python respectă aceeași regulă ca toate funcțiile FreeCAD: ele sunt separate în părți App(application) și GUI(interfață grafică). Partea de aplicație, Object App, definește geometria obiectului nostru, în timp ce partea GUI, definește modul în care obiectul va fi afișat pe ecran. Instrumentul View Provider Objet, ca oricare altă caracteristică FreeCAD, este disponibil numai când rulați FreeCAD în propriul GUI. Există mai multe proprietăți și metode disponibile pentru a construi obiectul. Proprietățile trebuie să fie oricare dintre tipurile de proprietăți predefinite oferite de FreeCAD și vor apărea în fereastra de vizualizare a proprietății, astfel încât acestea să poată fi editate de utilizator. În acest fel, obiectele FeaturePython (au toate proprietățile Python) sunt cu adevărat și în totalitate parametrice. Puteți defini proprietăți pentru Obiect și ViewObject separat.

Truc: În versiunile anterioare am folosit modulul Python cPickle. Cu toate acestea, acest modul execută un cod arbitrar și provoacă astfel o problemă de securitate. Astfel, am optat pentru modulul json al Python.

Exemplu de bază

Următorul exemplu poate fi găsit in fișierul src/Mod/TemplatePyMod/FeaturePython.py, împreună cu alte exemple:

'''Examples for a feature class and its view provider.'''

import FreeCAD, FreeCADGui
from pivy import coin

class Box:
    def __init__(self, obj):
        '''Add some custom properties to our box feature'''
        obj.addProperty("App::PropertyLength","Length","Box","Length of the box").Length=1.0
        obj.addProperty("App::PropertyLength","Width","Box","Width of the box").Width=1.0
        obj.addProperty("App::PropertyLength","Height","Box", "Height of the box").Height=1.0
        obj.Proxy = self
   
    def onChanged(self, fp, prop):
        '''Do something when a property has changed'''
        FreeCAD.Console.PrintMessage("Change property: " + str(prop) + "\n")
 
    def execute(self, fp):
        '''Do something when doing a recomputation, this method is mandatory'''
        FreeCAD.Console.PrintMessage("Recompute Python Box feature\n")

class ViewProviderBox:
    def __init__(self, obj):
        '''Set this object to the proxy object of the actual view provider'''
        obj.addProperty("App::PropertyColor","Color","Box","Color of the box").Color=(1.0,0.0,0.0)
        obj.Proxy = self
 
    def attach(self, obj):
        '''Setup the scene sub-graph of the view provider, this method is mandatory'''
        self.shaded = coin.SoGroup()
        self.wireframe = coin.SoGroup()
        self.scale = coin.SoScale()
        self.color = coin.SoBaseColor()
       
        data=coin.SoCube()
        self.shaded.addChild(self.scale)
        self.shaded.addChild(self.color)
        self.shaded.addChild(data)
        obj.addDisplayMode(self.shaded,"Shaded");
        style=coin.SoDrawStyle()
        style.style = coin.SoDrawStyle.LINES
        self.wireframe.addChild(style)
        self.wireframe.addChild(self.scale)
        self.wireframe.addChild(self.color)
        self.wireframe.addChild(data)
        obj.addDisplayMode(self.wireframe,"Wireframe");
        self.onChanged(obj,"Color")
 
    def updateData(self, fp, prop):
        '''If a property of the handled feature has changed we have the chance to handle this here'''
        # fp is the handled feature, prop is the name of the property that has changed
        l = fp.getPropertyByName("Length")
        w = fp.getPropertyByName("Width")
        h = fp.getPropertyByName("Height")
        self.scale.scaleFactor.setValue(float(l),float(w),float(h))
        pass
 
    def getDisplayModes(self,obj):
        '''Return a list of display modes.'''
        modes=[]
        modes.append("Shaded")
        modes.append("Wireframe")
        return modes
 
    def getDefaultDisplayMode(self):
        '''Return the name of the default display mode. It must be defined in getDisplayModes.'''
        return "Shaded"
 
    def setDisplayMode(self,mode):
        '''Map the display mode defined in attach with those defined in getDisplayModes.\
                Since they have the same names nothing needs to be done. This method is optional'''
        return mode
 
    def onChanged(self, vp, prop):
        '''Here we can do something when a single property got changed'''
        FreeCAD.Console.PrintMessage("Change property: " + str(prop) + "\n")
        if prop == "Color":
            c = vp.getPropertyByName("Color")
            self.color.rgb.setValue(c[0],c[1],c[2])
 
    def getIcon(self):
        '''Return the icon in XPM format which will appear in the tree view. This method is\
                optional and if not defined a default icon is shown.'''
        return """
            /* XPM */
            static const char * ViewProviderBox_xpm[] = {
            "16 16 6 1",
            "   c None",
            ".  c #141010",
            "+  c #615BD2",
            "@  c #C39D55",
            "#  c #000000",
            "$  c #57C355",
            "        ........",
            "   ......++..+..",
            "   .@@@@.++..++.",
            "   .@@@@.++..++.",
            "   .@@  .++++++.",
            "  ..@@  .++..++.",
            "###@@@@ .++..++.",
            "##$.@@$#.++++++.",
            "#$#$.$$$........",
            "#$$#######      ",
            "#$$#$$$$$#      ",
            "#$$#$$$$$#      ",
            "#$$#$$$$$#      ",
            " #$#$$$$$#      ",
            "  ##$$$$$#      ",
            "   #######      "};
            """
 
    def __getstate__(self):
        '''When saving the document this object gets stored using Python's json module.\
                Since we have some un-serializable parts here -- the Coin stuff -- we must define this method\
                to return a tuple of all serializable objects or None.'''
        return None
 
    def __setstate__(self,state):
        '''When restoring the serialized object from document we have the chance to set some internals here.\
                Since no data were serialized nothing needs to be done here.'''
        return None


def makeBox():
    FreeCAD.newDocument()
    a=FreeCAD.ActiveDocument.addObject("App::FeaturePython","Box")
    Box(a)
    ViewProviderBox(a.ViewObject)

makeBox()

Proprietăți disponibile

Proprietățile sunt adevăratele pietre de temelie ale obiectelor FeaturePython. Prin intermediul acestora, utilizatorul va putea să interacționeze și să vă modifice obiectul. După crearea unui nou obiect FeaturePython din documentul dvs. (obj = FreeCAD.ActiveDocument.addObject ("App :: FeaturePython", "Box")), puteți obține o listă a proprietăților disponibile prin emiterea:

obj.supportedProperties()

Veți obține o listă cu proprietățile disponibile:

App::PropertyBool
App::PropertyBoolList
App::PropertyFloat
App::PropertyFloatList
App::PropertyFloatConstraint
App::PropertyQuantity
App::PropertyQuantityConstraint
App::PropertyAngle
App::PropertyDistance
App::PropertyLength
App::PropertySpeed
App::PropertyAcceleration
App::PropertyForce
App::PropertyPressure
App::PropertyInteger
App::PropertyIntegerConstraint
App::PropertyPercent
App::PropertyEnumeration
App::PropertyIntegerList
App::PropertyIntegerSet
App::PropertyMap
App::PropertyString
App::PropertyUUID
App::PropertyFont
App::PropertyStringList
App::PropertyLink
App::PropertyLinkSub
App::PropertyLinkList
App::PropertyLinkSubList
App::PropertyMatrix
App::PropertyVector
App::PropertyVectorList
App::PropertyPlacement
App::PropertyPlacementLink
App::PropertyPlacementList
App::PropertyColor
App::PropertyColorList
App::PropertyMaterial
App::PropertyPath
App::PropertyFile
App::PropertyFileIncluded
App::PropertyPythonObject
Part::PropertyPartShape
Part::PropertyGeometryList
Part::PropertyShapeHistory
Part::PropertyFilletEdges
Sketcher::PropertyConstraintList

Când adăugați proprietăți obiectelor dvs. personalizate, aveți grijă de acestea:

  • Nu utilizați caractere "<" sau ">" în descrierile de proprietăți (care ar sparge fragmente de cod în fișierul xml.fcstd)
  • Proprietățile sunt stocate în ordine alfabetică într-un fișier .fcstd. Toate proprietățile ale căror nume vine după ”Shape” sunt așezate în ordine alfabetică . Dacă aveți o formă în proprietățile dvs., și cum orice proprietate al cărei nume vine după "Shape", se poate să aveți parte de comportamente ciudate.

A complete list of property attributes can be seen in the PropertyStandard C++ header file. For instance, if you want to allow the user to enter only a limited range of values (e.g. using PropertyIntegerConstraint), in Python you will assign a tuple containing not only the property value, but also the lower and upper limit as well as the stepsize, as below:

prop = (value, lower, upper, stepsize)

Tipuri de proprietăți

Implicit proprietățile pot fi actualizate. Este posibil să se facă proprietățile numai pentru citire, de exemplu în cazul în care cineva dorește să afișeze rezultatul unei metode. De asemenea, este posibilă ascunderea proprietății. Tipul de proprietate poate fi setat utilizând

obj.setEditorMode("MyPropertyName", mode)

unde mode este un int scurt care poate fi definit ca:

 0 -- modul imolicit, read and write
 1 -- read-only
 2 -- hidden

EditorModes nu sunt definite la reîncărcarea fișierului FreeCAD. Acest lucru ar putea fi făcut prin funcția the __setstate__ function. Vezi http://forum.freecadweb.org/viewtopic.php?f=18&t=13460&start=10#p108072. Folosind setEditorMode proprietățile sunt citite numai în PropertyEditor. S-ar putea schimba încă de la Python. Pentru a le face să citească doar setarea trebuie să fie transmisă direct în interiorul funcției addProperty. A s vedea http://forum.freecadweb.org/viewtopic.php?f=18&t=13460&start=20#p109709 for an example.

Using the direct setting in the addProperty function, you also have more possibilities. In particular, an interesting one is mark a property as an output property. This way FreeCAD won't mark the feature as touched when changing it (so no need to recompute).

Example of output property (see also https://forum.freecadweb.org/viewtopic.php?t=24928):

obj.addProperty("App::PropertyString","MyCustomProperty","","",8)

The property types that can be set at last parameter of the addProperty function are:

 0 -- Prop_None, No special property type
 1 -- Prop_ReadOnly, Property is read-only in the editor
 2 -- Prop_Transient, Property won't be saved to file
 4 -- Prop_Hidden, Property won't appear in the editor
 8 -- Prop_Output, Modified property doesn't touch its parent container
 16 -- Prop_NoRecompute, Modified property doesn't touch its container for recompute


You can find these different property types defined in the source code C++ header for PropertyContainer

Alte exemple mai complexe

Acest exemplu ne face să utilizăm Part Module pentru a crea un octahedron, apoi crează reprezentarea sa coin cu pivy.

Primul este însuși obiectul Document:

import FreeCAD, FreeCADGui, Part
import pivy
from pivy import coin

class Octahedron:
  def __init__(self, obj):
     "Add some custom properties to our box feature"
     obj.addProperty("App::PropertyLength","Length","Octahedron","Length of the octahedron").Length=1.0
     obj.addProperty("App::PropertyLength","Width","Octahedron","Width of the octahedron").Width=1.0
     obj.addProperty("App::PropertyLength","Height","Octahedron", "Height of the octahedron").Height=1.0
     obj.addProperty("Part::PropertyPartShape","Shape","Octahedron", "Shape of the octahedron")
     obj.Proxy = self

  def execute(self, fp):
     # Define six vetices for the shape
     v1 = FreeCAD.Vector(0,0,0)
     v2 = FreeCAD.Vector(fp.Length,0,0)
     v3 = FreeCAD.Vector(0,fp.Width,0)
     v4 = FreeCAD.Vector(fp.Length,fp.Width,0)
     v5 = FreeCAD.Vector(fp.Length/2,fp.Width/2,fp.Height/2)
     v6 = FreeCAD.Vector(fp.Length/2,fp.Width/2,-fp.Height/2)
     
     # Make the wires/faces
     f1 = self.make_face(v1,v2,v5)
     f2 = self.make_face(v2,v4,v5)
     f3 = self.make_face(v4,v3,v5)
     f4 = self.make_face(v3,v1,v5)
     f5 = self.make_face(v2,v1,v6)
     f6 = self.make_face(v4,v2,v6)
     f7 = self.make_face(v3,v4,v6)
     f8 = self.make_face(v1,v3,v6)
     shell=Part.makeShell([f1,f2,f3,f4,f5,f6,f7,f8])
     solid=Part.makeSolid(shell)
     fp.Shape = solid

  # helper mehod to create the faces
  def make_face(self,v1,v2,v3):
     wire = Part.makePolygon([v1,v2,v3,v1])
     face = Part.Face(wire)
     return face

Apoi, avem obiectul furnizorului de vizualizare, responsabil pentru afișarea obiectului în scena 3D:

class ViewProviderOctahedron:
  def __init__(self, obj):
     "Set this object to the proxy object of the actual view provider"
     obj.addProperty("App::PropertyColor","Color","Octahedron","Color of the octahedron").Color=(1.0,0.0,0.0)
     obj.Proxy = self

  def attach(self, obj):
     "Setup the scene sub-graph of the view provider, this method is mandatory"
     self.shaded = coin.SoGroup()
     self.wireframe = coin.SoGroup()
     self.scale = coin.SoScale()
     self.color = coin.SoBaseColor()

     self.data=coin.SoCoordinate3()
     self.face=coin.SoIndexedLineSet()

     self.shaded.addChild(self.scale)
     self.shaded.addChild(self.color)
     self.shaded.addChild(self.data)
     self.shaded.addChild(self.face)
     obj.addDisplayMode(self.shaded,"Shaded");
     style=coin.SoDrawStyle()
     style.style = coin.SoDrawStyle.LINES
     self.wireframe.addChild(style)
     self.wireframe.addChild(self.scale)
     self.wireframe.addChild(self.color)
     self.wireframe.addChild(self.data)
     self.wireframe.addChild(self.face)
     obj.addDisplayMode(self.wireframe,"Wireframe");
     self.onChanged(obj,"Color")

  def updateData(self, fp, prop):
     "If a property of the handled feature has changed we have the chance to handle this here"
     # fp is the handled feature, prop is the name of the property that has changed
     if prop == "Shape":
        s = fp.getPropertyByName("Shape")
        self.data.point.setNum(6)
        cnt=0
        for i in s.Vertexes:
           self.data.point.set1Value(cnt,i.X,i.Y,i.Z)
           cnt=cnt+1
        
        self.face.coordIndex.set1Value(0,0)
        self.face.coordIndex.set1Value(1,1)
        self.face.coordIndex.set1Value(2,2)
        self.face.coordIndex.set1Value(3,-1)

        self.face.coordIndex.set1Value(4,1)
        self.face.coordIndex.set1Value(5,3)
        self.face.coordIndex.set1Value(6,2)
        self.face.coordIndex.set1Value(7,-1)

        self.face.coordIndex.set1Value(8,3)
        self.face.coordIndex.set1Value(9,4)
        self.face.coordIndex.set1Value(10,2)
        self.face.coordIndex.set1Value(11,-1)

        self.face.coordIndex.set1Value(12,4)
        self.face.coordIndex.set1Value(13,0)
        self.face.coordIndex.set1Value(14,2)
        self.face.coordIndex.set1Value(15,-1)

        self.face.coordIndex.set1Value(16,1)
        self.face.coordIndex.set1Value(17,0)
        self.face.coordIndex.set1Value(18,5)
        self.face.coordIndex.set1Value(19,-1)

        self.face.coordIndex.set1Value(20,3)
        self.face.coordIndex.set1Value(21,1)
        self.face.coordIndex.set1Value(22,5)
        self.face.coordIndex.set1Value(23,-1)

        self.face.coordIndex.set1Value(24,4)
        self.face.coordIndex.set1Value(25,3)
        self.face.coordIndex.set1Value(26,5)
        self.face.coordIndex.set1Value(27,-1)

        self.face.coordIndex.set1Value(28,0)
        self.face.coordIndex.set1Value(29,4)
        self.face.coordIndex.set1Value(30,5)
        self.face.coordIndex.set1Value(31,-1)

  def getDisplayModes(self,obj):
     "Return a list of display modes."
     modes=[]
     modes.append("Shaded")
     modes.append("Wireframe")
     return modes

  def getDefaultDisplayMode(self):
     "Return the name of the default display mode. It must be defined in getDisplayModes."
     return "Shaded"

  def setDisplayMode(self,mode):
     return mode

  def onChanged(self, vp, prop):
     "Here we can do something when a single property got changed"
     FreeCAD.Console.PrintMessage("Change property: " + str(prop) + "\n")
     if prop == "Color":
        c = vp.getPropertyByName("Color")
        self.color.rgb.setValue(c[0],c[1],c[2])

  def getIcon(self):
     return """
        /* XPM */
        static const char * ViewProviderBox_xpm[] = {
        "16 16 6 1",
        "    c None",
        ".   c #141010",
        "+   c #615BD2",
        "@   c #C39D55",
        "#   c #000000",
        "$   c #57C355",
        "        ........",
        "   ......++..+..",
        "   .@@@@.++..++.",
        "   .@@@@.++..++.",
        "   .@@  .++++++.",
        "  ..@@  .++..++.",
        "###@@@@ .++..++.",
        "##$.@@$#.++++++.",
        "#$#$.$$$........",
        "#$$#######      ",
        "#$$#$$$$$#      ",
        "#$$#$$$$$#      ",
        "#$$#$$$$$#      ",
        " #$#$$$$$#      ",
        "  ##$$$$$#      ",
        "   #######      "};
        """

  def __getstate__(self):
     return None

  def __setstate__(self,state):
     return None

În cele din urmă, odată ce obiectul și obiectul său de vedere sunt definite, trebuie doar să le numim (clasa Octahedron și codul clasei viewprovider pot fi copiate direct în consola Python FreeCAD):

FreeCAD.newDocument()
a=FreeCAD.ActiveDocument.addObject("App::FeaturePython","Octahedron")
Octahedron(a)
ViewProviderOctahedron(a.ViewObject)

Crearea de obiecte selectabile

Dacă doriți să faceți obiectul selectabil sau cel puțin o parte a acestuia, făcând clic pe el în fereastra de vizualizare, trebuie să includeți forma geometriei sale în interiorul unui nod SoFCSelection. Dacă obiectul are o reprezentare complexă, cu widget-uri, adnotări etc., poate doriți să includeți doar o parte a acestuia într-o selecție SoFCSelecție. Tot ceea ce este un SoFCSelection este scanat constant de FreeCAD pentru a detecta selectia / preselectarea, deci ar fi bine să nu incercați a o supraincarca cu scanări inutile. Iată un exemplu de ceea ce ați face pentru a include o self.face din exemplul de mai sus :

selectionNode = coin.SoType.fromName("SoFCSelection").createInstance()
selectionNode.documentName.setValue(FreeCAD.ActiveDocument.Name)
selectionNode.objectName.setValue(obj.Object.Name) # here obj is the ViewObject, we need its associated App Object
selectionNode.subElementName.setValue("Face")
selectNode.addChild(self.face)
...
self.shaded.addChild(selectionNode)
self.wireframe.addChild(selectionNode)

Pur și simplu, creați un nod SoFCSelection, apoi adăugați nodurile de geometrie la acesta, apoi îl adăugați la nodul principal, în loc să adăugați direct nodurile de geometrie.

Lucrul cu forme simple

Dacă obiectul dvs. parametric emite doar o formă simplă, nu este necesar să utilizați un obiect furnizor de vizualizare(view provider object). Forma va fi afișată utilizând reprezentarea standard a formelor din FreeCAD:

import FreeCAD as App
import FreeCADGui
import FreeCAD
import Part
class Line:
    def __init__(self, obj):
        '''"App two point properties" '''
        obj.addProperty("App::PropertyVector","p1","Line","Start point")
        obj.addProperty("App::PropertyVector","p2","Line","End point").p2=FreeCAD.Vector(1,0,0)
        obj.Proxy = self

    def execute(self, fp):
        '''"Print a short message when doing a recomputation, this method is mandatory" '''
        fp.Shape = Part.makeLine(fp.p1,fp.p2)

a=FreeCAD.ActiveDocument.addObject("Part::FeaturePython","Line")
Line(a)
a.ViewObject.Proxy=0 # just set it to something different from None (this assignment is needed to run an internal notification)
FreeCAD.ActiveDocument.recompute()

Același cod utilizând ViewProviderLine

import FreeCAD as App
import FreeCADGui
import FreeCAD
import Part

class Line:
    def __init__(self, obj):
         '''"App two point properties" '''
         obj.addProperty("App::PropertyVector","p1","Line","Start point")
         obj.addProperty("App::PropertyVector","p2","Line","End point").p2=FreeCAD.Vector(100,0,0)
         obj.Proxy = self
   
    def execute(self, fp):
        '''"Print a short message when doing a recomputation, this method is mandatory" '''
        fp.Shape = Part.makeLine(fp.p1,fp.p2)

class ViewProviderLine:
   def __init__(self, obj):
      ''' Set this object to the proxy object of the actual view provider '''
      obj.Proxy = self

   def getDefaultDisplayMode(self):
      ''' Return the name of the default display mode. It must be defined in getDisplayModes. '''
      return "Flat Lines"

a=FreeCAD.ActiveDocument.addObject("Part::FeaturePython","Line")
Line(a)
ViewProviderLine(a.ViewObject)
App.ActiveDocument.recompute()

Informație suplimentară

Există câteva subiecte foarte interesante pe forum despre obiectele script:

- Python object attributes lost at load

- New FeaturePython is grey

- Eigenmode frequency always 0?

- how to implement python feature's setEdit properly?

În plus față de exemplele prezentate aici puteți să vă aruncați o privire în codul sursă FreeCAD src/Mod/TemplatePyMod/FeaturePython.py for more examples.

PySide
Embedding FreeCAD