Part FormGenerator

Objekte ändern: Boolesche Operationen , Vereinigung , Schnitt , Ausschneiden , Join features , Connect , Embed , Cutout
Aufteilungswerkzeuge: Boolesche Fragmente , Slice a part , Slice , XOR , Part Defeaturing
Verbund: Erzeuge Verbund , Verbund auflösen , Compound Filter ; Extrudieren , Kanten abrunden , Drehen , Schnitt , Schnitte... , Abschrägen , Spiegelung , Ruled Surface , Sweep , Loft
Offset-Werkzeuge: 3D Offset , 2D Offset , Dicke , Projection on surface

Other languages:

Beschreibung

Ein Werkzeug zur Erstellung von komplexeren Formen aus verschiedenen parametrischen geometrischen Grundkörpern.

This tool will let you create shapes by creating

Edge from two vertices
Face from vertices
1. Select vertices bounding the face in the 3D view
2. Select if face should be planar
3. Click on Create
4. Object will be created in 3D view and will be listed in tree view
Wire from edges introduced in version 0.18
1. Select a set of adjacent edges in the 3D view
2. Click on Create
Face from edges
1. Select a closed set of edges bounding the face in the 3D view
2. Select if face should be planar
3. Click on Create
4. Object will be created in 3D view and will be listed in tree view
Shell from faces
1. Select faces in the 3D view
2. Select if the shape should be refined
3. Select if all faces should be included in shell
4. Click on Create
5. Object will be created in 3D view and will be listed in tree view
Solid from shell
1. Select if the shape should be refined
2. Click on Create
3. Object will be created in 3D view and will be listed in tree view

A possible workflow could be:

Draw a wireframe-model of your shape using the tools in the draft-workbench (for example line and dwire)
Create all faces with "face from edges"
Create a "shell from faces"
Create a "solid from shell"