Part Helix

From FreeCAD Documentation
Revision as of 03:26, 30 October 2018 by FuzzyBot (talk | contribs) (Updating to match new version of source page)

Part Helix

Ubicación en el Menú
Part → Create Primitives → Helix
Entornos de trabajo
Part, OpenSCAD
Atajo de teclado por defecto
Ninguno
Introducido en versión
-
Ver también
..

Description

A Helix geometric primitive is available from the Create Primitives dialogue in the Part workbench.

The Create Primitives dialogue can be accessed via the CreatePrimitives icon located in the Part menu or the Part toolbar, in the Part Workbench. A common usage for the Helix is for threads in conjunction with the sweep operation.

How to use

Parameter

  • Pitch:The pitch corresponds to the space between two consecutive "turns" of the helix measured along the main axis of the helix.
  • Height: The height corresponds to the overall height of the helix measured along the main axis of the helix.
  • Radius: The radius corresponds to the radius of the circle built by the helix by viewing the helix from the top / bottom.
  • Angle: Per default the helix is built on a imaginary cylinder. With this option it is possible to build the helix on a imaginay cone. This angle corresponds to the angle of the cone. The value must be comprised between 0 and +90 deg.
  • Right-handed or Left-handed: This parameter specifies the handedness of the helix.

Location

  • X: The main axis of the helix will be translated along the x axis of the value you indicate in this field.
  • Y: The main axis of the helix will be translated along the y axis of the value you indicate in this field.
  • Z: The main axis of the helix will be translated along the z axis of the value you indicate in this field.
  • Direction: Per default the main axis of the helix is the z axis. Here you have the possibility to edit the main axis of the helix. If you select the parameter "user defined..." , you will be invited to indicate the main axis of the helix by entering the coordinates of its vector.
  • 3D View: allows you select center in the 3D view

Options

Properties

Once you have created the helix you have the possibility to edit its parameters.

The parameters in this menu are similar to those described above.
Base

  • Placement: allows you to move or rotate the helix
  • Angle: