Díl Oddělit

From FreeCAD Documentation
Revision as of 14:28, 13 February 2019 by FuzzyBot (talk | contribs) (Updating to match new version of source page)

Díl Oddělit

Umístění Menu
Díl → Oddělit
Pracovní stoly
Díl, Kompletace
Výchozí zástupce
Nikdo
Představen ve verzi
-
Viz také
Díl Sjednotit, Díl Společné

Usekává (odděluje) vybrané objekty Díl tak, že později vybraný díl vyjme z dříve vybraného dílu. Tato operace je plně parametrická a komponenty mohou být upravovány a výsledek přepočítáván.

Cuts (subtracts) selected Part objects, the last one being subtracted from the first one. This operation is fully parametric and the components can be modified and the result recomputed.

Cut
Cut

How to use

  1. Select two shapes
  2. Press PartBooleanCut from the top menu or the Cut button from the tool tab.

Supported inputs

Input objects must be OpenCascade shapes. Examples: stuff made with Part, PartDesign, Sketcher workbenches. Not meshes (unless those were converted to shapes) - for meshes, there are specific Boolean tools in MeshDesign workbench.