Draft Snap

Snäppa innebär att din nästa 3d punkt "klistras" på en existerande punkt.

Available snap locations

• File:Snap Angle.png Angle: the special cardinal points of circles and arcs, at 45° and 90°
• File:Snap Center.png Center: the center point of arcs and circles
• File:Snap Endpoint.png Endpoint: the endpoints of line, arc and spline segments
• File:Snap Extension.png Extension: on an imaginary line that extends beyond the endpoints of line segments. Hover the mouse over the desired object to activate its extension snap
• File:Snap Grid.png Grid: the nodes of the Draft grid, if visible.
• File:Snap Intersection.png Intersection: the intersection of 2 line or arc segments. Hover the mouse over the two desired bjects to activate their intersection snaps
• File:Snap Midpoint.png Midpoint: the middle point of line and arc segments
• File:Snap Near.png Near: the closest point on the nearest object
• File:Snap Ortho.png Ortho: on imaginary lines that cross the last point, and extend at 0°, 45° and 90°
• File:Snap Parallel.png Parallel: on an imaginary line parallel to a line segment. Hover the mouse over the desired object to activate its parallel snap
• File:Snap Perpendicular.png Perpendicular: on line and arc segments, perpendicularly to the latest point

Options

• File:Snap Lock.png Lock: turns snapping on/off globally
• Certain additional snap locations can be obtained by combining 2 snap locations, such as ortho + extension, that will give you a snap point at the intersection of their imaginary lines.
• Other, more complex snap locations can also be obtained by using constraining (by pressing SHIFT or X or Y or Z while drawing).
• The maximum distance at which a point is snapped a snap location is specified in the preferences, and can also be changed on-the-fly by pressing [ or ] keys.