Arch Паенль

From FreeCAD Documentation
Revision as of 21:54, 19 February 2020 by FuzzyBot (talk | contribs) (Updating to match new version of source page)

Arch Panel

Системное название
Arch Panel
Расположение в меню
Архитектура → Панель
Верстаки
Arch
Быстрые клавиши
P A
Представлено в версии
0.15
См. также
Структура, Arch Panel Cut, Arch Panel Sheet

Описание

Этот инструмент позволяет создавать все виды панельных элементов, как правило, для панельных конструкций, таких как проект WikiHouse, но также для всех видов объектов, которые основаны на плоском профиле.

На приведенном выше рисунке показана серия объектов панели, просто сделанных из импортированных 2D-контуров из файла DXF. Затем они могут быть повернуты и собраны для создания структур.

Начиная с версии 0.17, панель Arch также может использоваться для создания гофрированных или трапециевидных профилей:

Использование

  1. Select a 2D shape (draft object, face or sketch) - optional.
  2. Press the Arch Panel button, or press P then A keys.
  3. Adjust the desired properties.

Ограничения

  • В настоящее время нет автоматической системы для производства двумерных разрезанных листов из панельных объектов, но такая функция находится в планах и будет добавлена в будущем.
  • Этот инструмент недоступен в версиях FreeCAD до 0,15

Options

  • Panels share the common properties and behaviours of all Arch Components.
  • The thickness of a panel can be adjusted after creation.
  • Press Esc or the Cancel button to abort the current command.
  • Double-clicking on the panel in the tree view after it is created allows you to enter edit mode and access and modify its additions and subtractions.
  • It is possible to automatically make panels composed of more than one sheet of a material, by raising its Sheets property.
  • Panels can make use of Multi-Materials. When using a multi-material, the panel will become multi-layer, using the thicknesses specified by the multi-material. Any layer with a thickness of zero will have its thickness defined automatically by the remaining space defined by the Panel's own Thickness value, after subtracting the other layers.

Properties

  • ДанныеLength: The length of the panel
  • ДанныеWidth: The width of the panel
  • ДанныеThickness: The thickness of the panel
  • ДанныеArea: The area of the panel (automatic)
  • ДанныеSheets: The number of sheets of material the panel is made of
  • ДанныеWave Length: The length of the wave for corrugated panels
  • ДанныеWave Height: The height of the wave for corrugated panels
  • ДанныеWave Type: The type of the wave for corrugated panels, curved, trapezoidal or spiked
  • ДанныеWave Direction: The orientation of the waves for corrugated panels
  • ДанныеBottom Wave: If the bottom wave of the panel is flat or not

Написание скриптов

The Panel tool can be used in macros and from the Python console by using the following function:

Panel = makePanel(baseobj=None, length=0, width=0, thickness=0, placement=None, name="Panel")
  • Creates a Panel object from the given baseobj, which is a closed profile, and the given extrusion thickness.
    • If no baseobj is given, you can provide the numerical values for the length, width, and thickness to create a block panel.
  • If a placement is given, it is used.

Example:

import FreeCAD, Draft, Arch

Rect = Draft.makeRectangle(1000, 400)
Panel = Arch.makePanel(Rect, thickness=36)

Учебники