View Issue Details
ID | Project | Category | View Status | Date Submitted | Last Update |
---|---|---|---|---|---|
0000639 | PartDesign | Bug | public | 2012-03-14 12:29 | 2012-12-20 21:40 |
Reporter | ariel-co | Assigned To | |||
Priority | normal | Severity | minor | Reproducibility | always |
Status | closed | Resolution | no change required | ||
Product Version | 0.12 | ||||
Summary | 0000639: Circular pocket has one split edge | ||||
Description | After mapping a sketch to a face and creating a circular pocket, there are two edges in the mapped face, one 270°and the other 90°. (See http://sourceforge.net/apps/phpbb/free-cad/viewtopic.php?f=3&t=2342) | ||||
Tags | No tags attached. | ||||
FreeCAD Information | |||||
2012-03-14 12:29
|
|
2012-05-06 22:04
|
|
|
More on this issue: see attached CirclePocketSplitExample.fcstd Version: 0.13.0930 (Git) Branch: master Hash: 7b2e15bedf5743fda7439581203619aae29cd9e7 Create a 10 mm cube box in Part Create a sketch with 5 mm dia Circle on one face Pocket the sketch, (producing a circular edge having 2 arcs, split at 3 o'clock and 6 o'clock) Create a sketch on the same face. Project external geometry, select the existing circular edge. (the splits in the arcs move to 12 o'clock and 3 o'clock) |
|
Since the result is topological correct and just not "pretty" I close this bug. |
Date Modified | Username | Field | Change |
---|---|---|---|
2012-03-14 12:29 | ariel-co | New Issue | |
2012-03-14 12:29 | ariel-co | File Added: pocket edges.FCStd | |
2012-05-05 18:00 | yorik | Project | FreeCAD => PartDesign |
2012-05-06 22:04 | djreichel | File Added: CirclePocketSplitExample.fcstd | |
2012-05-06 22:40 | djreichel | Note Added: 0002023 | |
2012-12-20 21:40 |
|
Note Added: 0002721 | |
2012-12-20 21:40 |
|
Status | new => closed |
2012-12-20 21:40 |
|
Resolution | open => no change required |